If you are using a Winchester Gun Safe, we understand how responsible you are in protecting the firearms. And even after spending hundreds of dollars on high-quality gun safes, sometimes your safe won’t open. If, for any reason, your Winchester Gun Safe Locked Out, don’t get panic. There are some easy ways to troubleshoot the locked-out issue, which we are discussing below.
Storing your gun in a safe minimizes the risk of theft, accidents and unauthorized access by your teens. Though several gun-safe brands are available in the market, we prefer Winchester Gun-safe because of its security features and its existence in the market for over a century.
How To Get Out of Winchester Gun Safe Locked Out Mode
Depending upon the model, whether it is mechanical or electronic, the company provides different instructions to its users. First, read the manual thoroughly, which comes with your model and follow the instructions written there. If it is still locked out, you have to follow the steps given below.
What If the Winchester Gun Safe Door Is Not Opening?
First, check whether you have entered the correct combination key or not. If you have stored it in a secure yet accessible location, kindly pull out the key and check twice.
Second, If you have shared the combination key with your wife or son, ask them whether they have changed it without informing you.
If the safe’s door still won’t open or produce a beeping sound after entering the correct combination code, then it’s time to replace your batteries.
[You should follow this step even if your keypad beeps and lights up normally. There may be enough power in the batteries to operate the keypad but not enough power to unlock the door.]
Sometimes, disconnected or Damaged Wiring also creates such issues. In such cases, remove the keypad to inspect whether any wire has come loose or cut. Even if the wiring is intact, you should remove the batteries and disconnect the wire from the keypad. Wait for at least 30 seconds, then reconnect the wires and reinstall the batteries to check whether it has started working or not. For long-lasting, we suggest you use 9-volt Alkaline Energizer or Duracell batteries.
How To Change or Reinstall Batteries of Your Winchester Gun Safe?
The process is quite easy and will not take more than 4-5 minutes.
To start the process, open the Slide door located at the bottom of the keypad.
Now gently pull the battery connector and wires down.
Attach the new battery to the connector and slide the door closed.
Congrats! You have successfully replaced the old batteries of your Gun safe.
If the problem is still there, you may have forgotten your electronic combination key. In such cases, you need to follow the instructions mentioned below.
You Might Also Like : Get Acquainted With Locked Out Troubleshooting Methods
How To Change the Combination Keys to Sort Winchester Gun Safe Locked Out Issues
If you know your current combination key, you can easily change it to a new one. Here are the steps a Winchester Gun Safe User should follow to change the combination code.
First, choose an easy-to-remember yet hard-to-guess 6-digit combination key. It’s supposed to be confidential.
Now enter the existing combination key and open the door of the safe.
Keep the door open throughout the process. Ensure you extend the locking bolts fully.
Press the “0” key six times (000000) until you hear a double beep. The double beep indicates that the Winchester Gun Safe is in programming mode.
Now it’s time to enter the new combination code you want to change. After successfully entering the new 6-digit combination key, you will again hear a double beep. If, for any reason, your Winchester safe doesn’t produce the double beep sound, then you have done something wrong. You should consider repeating step 3.
If the process is successful, the gun safe is ready to operate with the new combination code. To confirm, enter the new combination code again and try turning the handle. If the handle turns, then the code entered is correct.
But even after entering the correct code, your door does not open or only produces a double beep, but you don’t hear the locking mechanism disengaging, which means the gun safe’s batteries are down. To replace the batteries of your Winchester gun safe, kindly follow the steps mentioned above.
How To sort Winchester gun safe locked out issues If You Forgot The Existing Combination Code
It is a critical issue. If you forgot the Winchester gun safe existing electronic key combination, then you can’t sort out the issue at your home. In this case, you should go to the official website of Winchester and click on the COMBINATION/KEY REQUEST section. Just fill up the form and enter all the required details, like a notarized signature and/or proof of purchase. In case you have lost your purchase receipt, you should provide a letter from your local law enforcement indicating that the safe is in your possession and has not been reported stolen. There is also a charge of $35 for this service.
How To Sort Winchester Gun Safe Locked Out Issue for mechanical locking system
If your gun safe comes with a mechanical locking system, you can’t change
the key combination by yourself, and you must hire a licensed technician to solve such an issue. Changing mechanical lock combinations requires expertise and some special tools. Hence this should be done by a mechanic only.
The best thing is that if your Winchester gun safe comes with a mechanical lock and you want to change it to an electronic lock, you can do it easily by contacting Winchester.
How to open a Winchester Safe?
To open a Winchester safe, turn the dial in the right direction (clockwise) until you feel the dial tighten slightly. Now using fingertip pressure, continue turning the dial until it stops. The lock is now open. That’s all. To open the door, retract the bolt work and rotate the safe handle anti-clockwise.
What to do if my gun safe won’t open?
First, don’t get panic. Just read our article thoroughly and follow the steps carefully mentioned there to open your gun-safe door.
Why my gun safe doesn’t open, just beeps.
If your Winchester gun safe beeps five times but the lock is not opening, it’s time to change your gun safe battery. Just replace your old battery with a new alkaline battery And your safe will start working immediately.
What is the default lock code for Winchester Safe?
The default (factory pre-set) code for your Winchester safe is 1-2-3-4-5.